Interior wall putty powder batch of embedded inlay interior wall putty powder batch is a decorative effect and overall quality of the material used to improve Auxiliary. This product is polymer modified materials and reliable inorganic materials as the base material, the relevant functional additives blending refined processing. Easy to use, stable quality and avoid hollowing cracking, time-saving, environmental protection advantages of non-toxic, is to replace the old powder and paste, etc. 107 plastic and cement batch configuration scene unregulated top putty better products. To avoid batch embedded layer with the primary loss, batch embedded layer surface blistering, cracking, improve quality decorative coatings have better results. Use a suitable concrete, cement mortar, lime paper tendons, GRC board, gypsum board and other interior wall materials, top grassroots smooth, fill defects, voids, cracks and ensure smooth wall. 2, the closed walls, combined with the substrate to form a solid flat surface. Features 1, for interior walls, leveling the top surface treatment, and provide some hiding; 2, stable performance, easy scraping, sanding easy, convenient construction, low adhesion to the tool, operational for a long time; 3, dried hardening fast, good air permeability, strong bond, the surface smooth, silky feel, while saving the topcoat consumption; 4, crack, easy hollowing, shedding, good durability; 5, for a wide range, and cement compatible with the base surface, has a good affinity, non-toxic, is a green building decoration materials. Performance testing project performance test results container status without caking, even without agglomeration, even the construction of barrier-free accessibility Scratch dry time (h) <5 3 polish (%) 20-8060 bond strength (MPa)> 0.25 0.50 -5 ℃ low temperature freezer storage stability 4h unchanged, scraping accessibility -5 ℃ frozen 4h unchanged, scraping a barrier to use, this product with water to 2.5: 1-3: proportions (by weight) of a mechanically stirred into a thick paste suitable; 2, when the modulation putty, in a clean container, first put the right amount of water and then gradually pour dry putty powder, while down while stirring, until suitable consistency so far. Putty Stir for 10 minutes, then stir once to scratch; 3, Scratch putty technique should be comfortable, not scraping the first pass is too thick, the thickness of 0.3mm-0.5mm between appropriate, be the first Table putty dry again, the second time Zaigua putty, putty twice to complete general; 4, after drying putty level playing friction with fine sandpaper. Note 1, the coated surface must be clean, dry, no oil, no major defects, free of dust and crisp phenomenon, putty should be greater than the strength of grassroots strength; 2, grassroots serious irregularities should be ground or use a thin layer of plaster leveling, cut not leveling with putty; 3, the product is less than alkaline cement, little effect on the skin, if the fall in the eyes, rinse with water. Dosage: When batch insert thickness of 1mm, 0.9-1kg / m.